Maintenance of panel furniture

2020-08-22 11:54:19



The main material of panel furniture is wood-based panel. Compared with solid wood, the anisotropy of wood-based panel has been improved to a certain extent, and the probability of deformation and warping of panel furniture with qualified quality is smaller. The most feared of panel furniture is that the sheet edge is not tightly sealed. After the edge is peeled off, the board core can easily absorb the moisture in the air, causing the sheet to expand and break. At the same time, the formaldehyde in the wood-based panel will also be released from the peeling part of the edge. , Pollute the indoor environment. Therefore, the focus of the maintenance of panel furniture is to pay attention to the protection and treatment of the panel edge.


Compared with the tenon-and-mortise joint of solid wood furniture, the connection strength of panel furniture is slightly inferior, whether it is jointed by connectors, glued or nailed. Therefore, when moving panel furniture, dragging on the ground is a taboo. The correct way is to lift it off the ground and then move it. In the same way, the load-bearing capacity of panel furniture is not as good as that of solid wood furniture, and it needs to be properly hidden to prevent deformation.


LEAVE YOUR MESSAGES